The “PIN VALVE”
The valves are inspected at each stage of manufacture, all threads are checked using ISO approved thread gauges. On assembly, each valve is individually leak tested. The valves are also fitted with a safety device.
The safety device, or burst disc as it sometimes known consists of a retaining cap and frangible disc (copper washer if fitted) which is designed to rupture at a pre-determined pressure. For co² (Carbon dioxide) this is between 180 to 200 BAR. This prevents over-pressurisation of the cylinder as the contents vent to atmosphere as the disc ruptures.
Both the ON OFF valve and the PIN VALVE have been modified to improve safety in regard to reported “screw off” incidents within the industry. This can happen when the bottle is unscrewed from the paintball marker and instead of the astm thread releasing in the normal manner, the 5/8th unf bottle thread starts to undo. This, if the user has not noticed what is happening, can result in the bottle detaching from the valve and becoming a projectile fuelled by the release of the remaining co². The longer bottle thread of these Arrow-Precision safety valves is to allow many more turns before the aforementioned scenario can take place. Also there are two milled channels to allow gas to start escaping so relieving any pressure that may cause the bottle to become a projectile. Hopefully it would also alert the user to situation before an incident by the releasing gas.
In accordance with the United Kingdom Health and Safety Executive regulations (Pressure Systems and Transportable Gas Containers No.2169, 1989), any person who supplies any article for use in a pressure system, is required to ensure that all repairs are conducted such that they do not give rise to danger or otherwise impair the operation of any protective device in the system.
If you are unsure of how to repair or maintain your valve, or if you have any technical questions on the design of this product, then please contact us.
Arrow Precision Limited
NOTE: Please note that Arrow Precision replacement burst disc components are not approved for use in any other manufacturers valve. Arrow-Precision cannot be held responsible for injury resulting from this or any self assembly of components.